LPCI-9112 - Neatek LPCI-9112 - PCI low-profile 16-CH, 12-Bit 110kS/s multi-function DAQ card

LPCI-9112 - LPCI-9112 - PCI low-profile 16-CH, 12-Bit 110kS/s multi-function DAQ card...

LPCI-9112 - PCI low-profile 16-CH, 12-Bit 110kS/s multi-function DAQ card Simple Type: Data Acquisition

4-CH 14-bit 16MS/s simultaneous-sampling multi-function DAQ card.

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

General

[Analog Input] Conversion time: 8 µS
[Analog Input] Maximum sampling rate: 110kS/s
[Analog Input] Number of channels: 16 single-ended or 8 differential
[Analog Input] Resolution: 12 bits
[Analog Output] Compatibility: 5V/TTL
[Analog Output] Data transfers: Programmed I/O
[Analog Output] Digital I/O: Number of channels: 16 inputs/ outputs
[Analog Output] Number of channels: 2 voltage outputs
[Analog Output] Output driving capacity: +/-5mA max.
[Analog Output] Output ranges (software programmable): Unipolar 0~10V, 0~5V, 0~EXTREF
[Analog Output] Resolution: 12 bits
[Analog Output] Settling time: 30µS~0.5LSB
[Timer/ Counter] Base clock available: 2MHz, external clock to 10MHz
[Timer/ Counter] Compatibility: 5V/TTL
[Timer/ Counter] Number of channels: 1
[Timer/ Counter] Resolution: 16 bits
{Input signal ranges} Accuracy: 0.01% of FSR +/-1 LSB (Gain 0.5, 1), 0.02% of FSR +/-1 LSB (Gain 2, 4), 0.04% of FSR +/-1 LSB (Gain 8)
{Input signal ranges} Biploar: +/-10V(Gain 0.5), +/-5V (Gain 1), +/-2.5V (Gain 2), +/-1.25V (Gain 4), +/-0.65V (Gain 8)
{Input signal ranges} Unipolar: 0~10V (Gain 1), 0~5V (Gain 2), 0~2.5V (Gain 4), 0~1.25V (Gain 8)
Bus Interface: 32-bit PCI Bus, 3.3V or 5V
Data transfers: Programmed I/O, interrupt, bus mastering DMA
Function: Low-profile 12-Bit 110kS/s multi-function DAQ card
I/O Connector: 1 x 68-pin SCSI
Input coupling: DC
Input Impedance: 1G ohm
Overvoltage Protection: Continuous +/-35V
Power Requirement: +5V/ 500mA typical, +12V/ 110mA typical
Trigger modes: Software, pacer