PCI-9812 - PCI-9812 - 4-CH 12-Bit 20MS/s simultaneous-sampling analog input card with...
- Part Number:
- PCI-9812
- Model Number:
- PCI-9812
- Make:
- IEI
- Lead Time:
- Available
- Qty In Stock:
- Available
PCI-9812 - 4-CH 12-Bit 20MS/s simultaneous-sampling analog input card with 32k-sample A/D FIFO Simple Type: Data Acquisition
4-CH 14-bit 20MS/s simultaneous-sampling multi-function DAQ card.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- None Available
Specifications
- [Analog Input] Analog triggering Modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger
- [Analog Input] Coupling: DC
- [Analog Input] Data transfers: Bus mastering DMA
- [Analog Input] DNL: +/-0.4 LSB typical, +/-1.0 LSB maximum. INL: +/-1.9 LSB typical
- [Analog Input] FIFO buffer size: PCI-9810 and PCI-9812: 32k samples
- [Analog Input] Input coupling: DC
- [Analog Input] Input signal ranges: +/-1V: 50 ohm, 15M ohm input impedance; +/-2Vovervoltage protection. +/-5V: 50 ohm, 1.25k ohm input impedance; +/-10V overvoltage protection
- [Analog Input] Number of channels: 4 single-ended
- [Analog Input] PCI-9812A: 128k samples
- [Analog Input] Resolution: PCI-9812 and PCI-9812A: 12-bit. PCI-9810: 10-bit
- [Analog Input] sampling rate: 20MS/s
- [Analog Input] Slope: Rrising/ falling
- [Analog Input] Source: CH0, CH1, CH2 and CH3
- [Analog Input] Trigger modes: Software-trigger, pre-trigger, post-trigger, middle-trigger and delay trigger
- [Analog Input] Trigger sensitivity: 256 steps in full-scale voltage range
- [Analog Input] Trigger sources: Software, analog and digital trigger (5V/ TTL compatible)
- [Digital I/O] Compatibility: 5V/ TTL
- [Digital I/O] Compatibility: 5V/ TTL with 10K ohm pull down resistors
- [Digital I/O] Data transfers: Bus mastering DMA with A/D samples
- [Digital I/O] Digital Input Number of channels: 3
- [Digital I/O] External Digital Clock Compatibility: 5V/ TTL
- [Digital I/O] External Digital Clock Input coupling: DC
- [Digital I/O] External Digital Clock Input frequency: 20kHz to 40MHz
- [Digital I/O] External Digital Clock Input impedance: 50 ohm
- [Digital I/O] External Digital Clock Overvoltage protection: Diode clamping, -0.3V to +5.3V
- [Digital I/O] External Sine Wave Clock Input coupling: AC
- [Digital I/O] External Sine Wave Clock Input frequency: 300kHz to 40MHz
- [Digital I/O] External Sine Wave Clock Input impedance: 50 ohm
- [Digital I/O] External Sine Wave Clock Input range: 1.0 to 2.0Vpp
- [Digital I/O] External Sine Wave Clock Overvoltage protection: 2.5Vpp
- [Digital I/O] Minimum pulse width: 25ns
- [Digital I/O] Modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger
- [Digital I/O] Overvoltage protection: Diode clamping, -0.3V to +5.3V
- [Digital I/O] Slope: Rising edge
- [Digital I/O] Source: External digital trigger
- Bus Interface: 32-bit PCI Bus, 3.3V or 5V
- Bus Interface: 32-bit PCI Bus, 3.3V or 5V
- Function: 4-CH 10/12-Bit simultaneous-smpling analog input card
- I/O Connector: 5 x BNC. 1 x 10-pin ribbon male
- Power Requirement: PCI-9812: +5V/ 1.4A typical. PCI-9812A: +5V/ 1.4A typical. PCI-9810: +5V/ 1A typical.
Applications
- None Available
Aliases
- None Available
Related Items
PAC-1000G
IEI PAC-1000G PAC-1000G - 6-Slot Full-size Chassis with 300W ATX
PAC-1000G-ACE-832AP-RS
PAC-1000G 6-Slot Full-size Chassis with ACE-832AP-RS (RoHS compliant)
PAC-104N
PAC-104N - 4-slot Half Size Chassis with open frame AT- PAC-104N-3P
PAC-104N Chassis with PCI-30PB and ACE-890A auto range power supply